![]() Under Ubuntu 6.06 just add "usb 0x4b8 0x818" (no quotes) right after the similar comented out line in /etc/sane.d/nf - See PITA thread for more detail. Works out of the box, even if identified as CX3900 ![]() Requires debs (iscan & esci-interpreter) from AVASYS plus libltdl3 from older dist.ġ0.04 (tested on 64bit with iscan libltdl7 drivers), 9.10 ( reportedly), 8.10 (untested but libltdl7 drives are listed for 8.10 so non-libltdl7 drivers probably work for at least 8.04 too) Requires debs (iscan & esci-interpreter) from AVASYS and libltdl3 from older dist. Need to edit /etc/hotplug/usb/ermap: add a line for this scanner with 04b under 0xVVVV and 0xPPPP respectively. You need to add the product ID and device ID to /etc/sane.d/nf, ie set the usb line to "usb 0x04b8 0x0122". Reported to work on 32 bit with drivers from Epson web site in Japan fails on 64 bit Edit /etc/sane.d/nf - line: 'firmware /etc/sane.d/esfw41.bin'. ![]() ![]() Place driver esfw41.bin (from Windows installation) into /etc/sane.d/. Extract firmware from official drivers using unshield, then set path in /etc/sane.d/nfĪutodetected by xsane, works fine - except buttons Works Out Of The Box except the front buttons. Just Works! execpt for buttons on front which have no effect. Place driver tail_061.bin (from Windows installation) into /etc/sane.d/.
0 Comments
Leave a Reply. |